Dala Technology Co., Ltd.
Add to Cart
YB15 MDI CAN BASIC is a display instrument, suitable for all electric vehicles equipped with DALA controller;
YB15 MDI CAN BASIC is a vehicle instrument based on CAN communication. It can communicate with the vehicle to display information including vehicle speed, battery state-of-charge, hour meter, speed mode, fault code and others. It has merits of real-time communication, real-time display and high-level visualization, etc.
YB15 MDI CAN BASIC instrument does not need to be connected to the battery, but can be connected to the controller through a simple wiring harness. Such a simple connection method can not only reduce the cost of the wiring harness, but also save installation time.
| icons | Descriptions | ||||
|---|---|---|---|---|---|
| BDI | Display battery state of charge, and Red to indicate the power is low. | ||||
| Fault Code | Display fault code of the controller, multiple faults will be shown cyclically (in general 2 for tractor, 5 for pump, 6 for steering and 16 for instrument.) | ||||
| Speed Mode | Turtle indicates the vehicle is in low speed. | ||||
| Service Mode | When system failure is detected, service indicator and fault code will be shown simultaneously in Red. | ||||
| Hour Meter | The digits show the cumulative power-on time, in H | ||||
| Fault Indicator | Red to indicate system failure is detected, Green to indicate system in normal. | ||||
| Vehicle Speed | Display current vehicle speed, in KM/H. | ||||
| Content | Parameters | ||||
|---|---|---|---|---|---|
| Operating Voltage | 24V,48V(Wide Voltage Range9-72V) | ||||
| Baud Rate | 125Kbits/s( 250,500,800,1000Kbits/s Optional) | ||||
| Circuit Protection | Short Circuit Protection | ||||
| Display | 1.44” LCD, Resolution 240*240 | ||||
| Mating Pins | Female molex Minifit pin harness | ||||
| Enclosure Protection | IP65 | ||||
| Operating Temp. Range | -40°C ~ +85°C | ||||
| Storage Temp. Range | -50°C ~ +90°C | ||||
